Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX918W - Europe - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

NORYL GTX™ 918W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high melt flow. NORYL GTX918W resin may be an excellent candidate for automotive under-the-hood and electrical applications requiring the retention of properties while under thermal load.

UL Yellow Card Link E45329-236572

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	5	cm³/10min	ISO 1133
温度	280	°C	-
载荷	1.2	kg	-
熔体密度	924	kg/m³	-
熔体	0.21	W/(m K)	-
熔体的比热	1920	J/(kg K)	-
喷射温度	200	°C	-

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2400	MPa	ISO 527
屈服应力	60	MPa	ISO 527
屈服伸长率	4.5	%	ISO 527
断裂应力	55	MPa	ISO 527
断裂伸长率	30	%	ISO 527
弯曲模量	2200	MPa	ISO 178
简支梁缺口冲击强度, +23°C	20	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	10	kJ/m²	ISO 179/1eA
悬臂梁缺口冲击强度, +23°C, 4mm	20	kJ/m²	ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 4mm	10	kJ/m²	ISO 180/1A
球压硬度	95	MPa	ISO 2039-1

热性能	价值	单位	Test Standard
ISO数据
维卡软化温度, A	245	°C	ISO 306
维卡软化温度, B	190	°C	ISO 306
维卡软化温度, 120°C/h 50N	195	°C	ISO 306
线性热膨胀系数, 平行	80	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	80	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	1.5	mm	-
热导率	0.25	W/(m K)	DIN 52616

其它性能	价值	单位	Test Standard
吸水性	4.2	%	类似ISO 62
吸湿性	1.34	%	类似ISO 62
密度	1100	kg/m³	ISO 1183

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	100 - 120	°C	-
预干燥-时间	2 - 3	h	-
加工湿度	≤0.07	%	-
注塑熔体温度	280 - 310	°C	-
模具温度	80 - 120	°C	-
加料温度	60 - 80	°C	-
1区	260 - 280	°C	-
2区	270 - 290	°C	-
3区	280 - 300	°C	-

函数

典型数据

加工方法

注塑

应用

汽车

地区供应

欧洲

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.